Specifications & Downloads
TECHNICAL SPECIFICATIONS
| WINKIE DRILL | |
| Power Unit: | Gasoline, 2-Cycle, Air-Cooled Engine |
| Horsepower: | 10 hp @ 8400 rpm |
| Gear Shift Transmission: | Oil Bath |
| Type of Feed: | Unipress Hand Feed |
| Clutch: | Centifrugal |
| Maximum Bit Speed: | High Speed 2800 rpm | Low Speed 1200 rpm |
| Weight: | Winkie Drill: 185 lbs. | Unipress: 100 lbs. |
RATED DRILLING CAPABILITY
Core Barrel Size | Core Diameter | Hole Diameter | Depth Capacity |
E Size | 1"/23mm | 1-1/2"/38mm | 425-475'/130-145m |
A Size | 1.32"/32.5mm | 1.89"/48mm | 350'-400'/105-120m |
• Rated Drilling Capabilities Using Aluminum Drill Rods.
• Drilling Capabilities using steel rods would be less.
• Also depth rating may vary depending on rock formations and conditions.
DOWNLOADABLE PARTS MANUAL
| | | |
